Find answers to common questions about Nordecos services, measurement, installation and maintenance. We do not sell stone – we provide the agreed services for you and your supplier.
FAQ
Nordecos does not sell or manufacture stone worktops. You choose the material and buy the worktop from your preferred supplier or manufacturer. We can provide measurement, technical drawings, transport and installation by agreement.
We take responsibility for our measurements, drawings and installation work. Read more about our warranty.
We serve customers throughout Estonia, including the islands. In Norway, we cover Oslo and the surrounding area, within approximately 220 km of Oslo. Send us the site address so that we can clarify the work and any transport requirements.
Choose the material with your stone supplier, taking account of appearance, use, budget and maintenance needs. Granite, marble, quartz and ceramic materials have different properties. Follow the specific manufacturer’s advice and care instructions.
Nordecos can help assess dimensions, joints, openings, supports and whether the design can be installed on site. See our maintenance guides.
Yes. You can order measurement, technical drawings, transport and installation from us even if you buy your worktop from another supplier. If you have already ordered through a kitchen studio or manufacturer, clarify who will order the services before booking directly with us.
Yes. We work with stone manufacturers, suppliers, kitchen studios, building companies and interior architects. We agree responsibilities, documentation, the ordering process and pricing. Order details, drawings, photographs and process history are kept together for each order.
Read more on Become a partner.
Cabinets, side panels and cover panels must be fully installed, secured and level. Required supports and other conditions affecting the measurements must be agreed. The sink, cooktop and other integrated equipment must be available, or exact model details and necessary installation instructions must be provided beforehand.
As a general rule, the old worktop should be removed. If you want measurement while it is still in place, agree this in advance. The flooring must be finished for a stone waterfall side extending to the floor.
See the full preparation checklist and booking instructions on our measurement page.
Cabinets and supporting surfaces must be ready, secured and level. Agreed supports and cut-outs must be completed. The old worktop, sink and cooktop must be removed unless removal has been ordered from us. Equipment to be fitted must be on site.
Provide safe access, lighting and agreed parking. Protect the floor with a durable, non-slip covering secured in place. Cover furniture and appliances where needed. The room must be at least +15 °C on installation day and the following two days.
Water and electrical connections obstructing the work must be safely disconnected by the appropriate specialists. See all preparations on our installation page.
This depends on the material, slab size, thickness, cut-outs and the manufacturer’s capabilities. Weight, access, transport and supports also affect the size of the sections that can be installed.
As a starting point, we often recommend sections up to 3000 mm long. Longer sections may be possible but need individual assessment and agreement. The final layout and joint positions are agreed before production.
There is no single limit suitable for every worktop. The material, thickness, cut-outs, component shape and load on the overhang affect the support required.
We assess the design against the manufacturer’s instructions and agree the necessary supports before production and installation. Do not rely on a standard dimension unless it has been confirmed for your chosen slab.
We fit the agreed sink and cooktop into the worktop according to the selected design. Nordecos does not connect water, drainage, electricity or ventilation. A plumber installs and connects the tap.
If needed, we can help arrange a plumber. Follow the installers’ instructions about curing time when carrying out connection work. Do not use the worktop or equipment until the adhesive and silicone have fully cured, at least 24 hours after installation.
Heavy stone components need safe handling, and our installers wear safety footwear. Cover the carrying route and work area with durable, non-slip floor protection secured in place. It must not slide, create trip hazards or obstruct access.
We recommend covering nearby furniture and equipment. Some on-site adjustments can create dust even when extraction is used.
Sealing against the back wall or along a splashback is carried out when ordered and charged according to the current price list or a separate agreement. Agree the design and the sequence of wall finishing and sealing before installation.
Silicone joints should be checked and cleaned during use and renewed when needed. The need for renewal depends on use, condition and the instructions for the product used.
If the worktop is damaged, see our worktop repair page.